Don't Wait—Call Remediate.
Mold remediation
Everything the mold touched comes out and is replaced with new. Then we deal with the water that let it grow.
- Insured
- Replaced with new, never cleaned and reused
- Rebuild through our licensed construction partner
Why it is there
Mold is the second problem. Water was the first.
It grows where it stayed wet
Under a floor, behind a wall, under a sink. By the time it shows or smells, the material around it has been wet for a while.
It is often found during other work
On the Fremont job nobody saw it from above. It turned up under the hardwood when the wet floor came out.
Our rule
Everything the mold touched is replaced with new material, never cleaned and reused.
And the cause
New material over a wet structure would only start it again, so the drying is part of the job, measured with readings.
What the work covers
What mold remediation includes
The extent is set once we have opened up the area. These are the parts of the work.
Containment
Plastic walls close the work area off from the rest of the house before anything is opened.
Removal
Every piece the mold touched comes out: flooring, subfloor, drywall, whatever it reached.
Drying the structure
Moisture readings on what is left, and drying until they say dry.
New material in
The rebuild puts back new material through our licensed construction partner.
Ducts, when needed
Air duct cleaning as the last step after the mold work.
Claim documentation
Photos, moisture readings and line-item estimates in the industry's standard estimating format.
A real job in Fremont, 2026
Mold found under a hardwood floor
The meter found water under the boards. When the floor came out, there was mold under it, and it came out with the wet wood. The floor was dried and a new one laid.
How it goes
Contain, remove, dry, replace
Look and read
We find where it is wet with moisture readings and photograph what we see.
Contain
The area is closed off with plastic before anything is opened up.
Remove and dry
Everything the mold touched comes out. The structure dries until the readings say so.
Replace
New material goes back in, through our licensed construction partner.
What comes out
From the Fremont floor
From one real job: Fremont, 2026.
Before and after
Before and after, same spot, real photos
A comparison goes here when a cleared job has two photos of the same mold area, before and after. Until then, the Fremont page shows the first visit and the finished floor side by side.
Cost and planning
What sets the size of a mold job
How far it reached
Mold under one floor is a different job from mold in a wall cavity. We only know once the area is open, and we tell you before the scope grows.
Drying first
New material goes in after the readings say dry. That is what decides when the replacement starts.
Insurance
Coverage is between you and your policy. We document the loss for the claim: photos, moisture readings, and line-item estimates in the industry's standard estimating format.
Related
Bay Area and Dallas–Fort Worth
We handle mold remediation in the San Francisco Bay Area and in Dallas–Fort Worth. See the cities we have worked in.
Questions
What people ask when they find mold
Can I clean it myself?
Wiping a surface leaves the drywall, wood or flooring the mold grew in. Our rule is different: everything the mold touched is taken out and replaced with new material, never cleaned and reused.
How do you remove mold so it does not come back?
Two things. The material the mold grew in comes out and is replaced with new, and the water that fed it is found and dried, with moisture readings, before anything is closed up again.
What caused it, and will you fix the cause?
Mold follows water. On our Fremont job it was water under a hardwood floor; the mold was found under the floor and came out with the wet wood. We dry the structure as water mitigation, and the rebuild is done through our licensed construction partner.
Is anything the mold touched kept?
No. Everything the mold touched is replaced with new material. What it did not touch can be protected and kept.
Do I need air duct cleaning after mold work?
We offer it as the last step after mold work, once the replaced rooms are clean, so the system does not carry anything back into them. See air duct cleaning.
Don't Wait—Call Remediate.
Tell us where you found it
A stain, a smell, a soft floor. We come, read the moisture, and tell you what has to come out.
Call (281) 671-7777